Tianjin Baolishengni Plastic Pipe Made Co Ltd
Payment Terms: TT or LC
Ref Price : US $0.10-$10.00
PE black plastic water pipe for drinking water line plastic pe tube roll
Product Description
Meterial:polyethylene PE80 ,PE100
Tempreture:Below 40℃
Nominal pressure:0.4-1.6Mpa
Nominal diameter: φ20-φ1000
Usage:Municipal water supply, construction water supply, agricultural irrigation area
Interface mode: Hot melt butt, hot melt socket, flange connection, electric fuse socket.
Advangtage:Material non-toxic
anti-corrosion
non-scaling, high impact resistance
light weight
50 years of lifetime
Smooth inner wall
Small frictional resistance
Attention: black pipe with 3-4 bule lines,bule line should be buried underground.
Execution standard:GB/T13663-2000 GB/T13663.2-2005
Advantages:
Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium
Corrosion Resistant: resist chemical matters or electron chemical corrosion
Lower Installation Costs: light weight and ease of installation can reduce installation costs by as much as 50% over metal piping system
Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipe
Longevity: more than 50 years under proper use
Recycled and Environment-friendly
specification
PE80 pipes for water supply | |||||
Nominal pressure | 0.4mpa | 0.6mpa | 0.8mpa | 1.0mpa | 1.25mpa |
Nominal diameter | φ20 | φ25 | φ32 | φ40 | φ50 |
φ63 | φ75 | φ90 | φ110 | φ125 | |
φ140 | φ160 | φ180 | φ200 | φ225 | |
φ250 | φ280 | φ315 | φ355 | φ400 | |
φ450 | φ500 | φ550 | φ630 | φ1000 | |
PE100 pipes for water supply | |||||
Nominal pressure | 0.6mpa | 0.8mpa | 1.0mpa | 1.25mpa | 1.6mpa |
Nominal diameter | φ20 | φ25 | φ32 | φ40 | φ50 |
φ63 | φ75 | φ90 | φ110 | φ125 | |
φ140 | φ160 | φ180 | φ200 | φ225 | |
φ250 | φ280 | φ315 | φ355 | φ400 | |
φ450 | φ500 | φ550 | φ630 | φ1000 |
PE100--- PE WATER PIPE DATA
PRODUCT DISPLAY
Contact Information:
Tianjin Baolishengni Plastic Pipe Made Co.,Ltd
Email:
Blsn@sino-sources.com
Tianjin Baoli Shengni Plastic Pipe Manufacturing Co., Ltd. was established in 2003 with a registered capital of 61.88 million. The company is located in Tianjin Jinghai Economic Development Zone, covering an area of 50,000 square meters, close to Beijing-Shanghai, Beijing-Guangzhou Expressway and Tianjin. Hong Kong, Huanghua Port, Binhai New Area, and the national market. In the second half of 2008, Tianjin Jinhe Bimetal Wire Co., Ltd. completely acquired the company, which not only injected a lot of money into the company, but also made the company's business philosophy and quality consciousness completely new. In a short period of time, the company has developed into a high-tech enterprise integrating scientific research, development, production and sales. It specializes in producing HDPE high-density polyethylene double-wall corrugated pipe and large-diameter steel belt reinforced polyethylene spiral corrugated pipe. The company has passed ISO9001 system certification, has more than 200 employees, 13 and two large-scale workshops, with an annual output of 30,000 tons. The excellent products and perfect services have been recognized by local merchants.
The company adopts internationally advanced technology and equipment to produce new green environmental protection pipe. This product is a national-level torch promotion project and is a new type of pipe that the country vigorously promotes.
Our company pays attention to quality, focus on management, guarantees with strong technical force, adopts strict quality management system, and provides users with all-round technical support according to the standards of “new technology, high quality” and our sincerity and confidence. service.